Cart   0 item(s) - £0.00

CISBO BSD Blind Spot Detection Lane Change Assist System 24Ghz Microwave Sensors

CISBO BSD Blind Spot Detection Lane Change Assist System 24Ghz Microwave Sensors
CISBO BSD Blind Spot Detection Lane Change Assist System 24Ghz Microwave Sensors CISBO BSD Blind Spot Detection Lane Change Assist System 24Ghz Microwave Sensors CISBO BSD Blind Spot Detection Lane Change Assist System 24Ghz Microwave Sensors
CISBO BSD Blind Spot Detection Lane Change Assist System 24Ghz Microwave Sensors
Stock Status : In Stock
Product Code : BSD
Product Brand : CISBO
£169.99
Send to a friend

CISBO BSD Blind Spot Detection Lane Change Assist System 24Ghz Microwave Sensors


 

One year warranty


 

With BSD, no more blind spots and no worries for changing lanes any more.


By installing 2 pieces of 24GHz microwave sensors onto the car rear bumper, the moving objects that get close to the blind areas (3 meters from the right and left sides, 15 meters from behind) will be detected by the sensor and  the LED indicator will turn on and keep blinking for reminding the driver. In this situation, if the driver wants to change lanes, the buzzer will beep to remind the driver.

 

1. Millimetre Radar Spot Blind Detection can detect the blind spot on both sides of the vehicle by the microwave radar systems.

 

2. When the other vehicle enters into the blind range, the outer mirror or other display will remind the driver with sound.

 

 

3. The BSD system will detect the blind spot on both sides via the microwave radar system when the vehicle travels on the road and informs the driver the best time line then greatly reduce the traffic accident.


 

Features
 

 Use 24GHz, millimetre wave detection technology 

 Intelligent early warning judgment

 Adopt LED and Buzzer sound to alarm

 Ultra remote detection, there is no blind spot anymore

 Full-weather design, un-affected by wind, ice, snow & rain

 Low power consumption, no heat, long time operation

 Reverse turn off function is optional. Avoids working with   

 parking sensors, camera, etc. at the same time.

 No damage to the appearance of the installation, does not  

 damage the bumper. Suitable for all cars

 

Technical Data

 

   No

Project

Technical Parameters

1

Voltage range

DC9V--DC15V

2

Working current

<80mA

3

Sensor operating frequency
 

24GHz

4

Buzzer Alarm Decibel

80--100dB

5

Maximum detection range

Truck:0.3m-20m

Vehicle:0.3m-20m

Motorcycle:0.3m-20m

Pedestrian:0.3m-15m

6

Detection speed range

1km/h~120km/h

7

Buzzer alarm mode

Buzzer alarm 1: LED always bright

Buzzer alarm 2: LED flicker+buzzer alarm

8

Horizontal distance measurement angle

20°

9

Operating temperature

-20-----+70

10

Storage temperature

 -30----+80